DirecTouch Do It Yourself Set Up Guide

Dip Switch Settings a Standard Serial Cash Drawer

This document is intended to be used with standard serial cash drawer with dip switches.

1. The dipswitches must be changed from the factory default settings to the following:
1. Off
2. On
3. On
4. Off
5. Off
6. On
7. On
8. Off
9. On
10. All others Off
2. Install a generic/ text-only printer in Windows on the port the drawer is connected to. Name it "Cash Drawer on COMx" (x represents com port number) Set that port's flow control setting to Hardware.
3. In DirecTouch, assign the cash drawer as normal, but use 85 as the esc code.